SKODA KAROQ : A Well Design with Comfortable Appeal

-

The Karoq is the most recent SUV from Skoda to show up in India.
It very well may be viewed as a profound replacement to the yeti,
 yet while the last part feeling because of its peculiarity, Skoda has gone for the honest
with Karoq.


Skoda Karoq

Seen from the side, the nose is a perfect size and the huge squared wheel curves include muscle. The origami-like cuts and wrinkles around the nose and tail additionally include heaps of character. Around the front, the minuscule auxiliary lights give it a high-cheekbone look. Curiously, there is no winged bolt logo at the back, just 'Skoda' spelled quite huge.

Skoda Karoq in India 2020

Moving to the inside, it is here where the SUV's construct and nature of materials utilized truly sparkle. The front seats offer extra reinforcing, impeccable padding, and adequate sidelong help. Practically all the materials have an exceptional vibe, and Skoda fashioners have added to the intrigue of the lodge by fixing all that is significant with a lot of top-notch chrome. There is some around the vents, the middle support blends piano dark and chrome eminently, and the features carry on across to the guiding haggle too.


Skoda Karoq


Skoda Karoq With Sunroof


There is only one engine for India — a 150hp, 1.5-litre TSI turbo-petrol engine. The unit is tuned more for torque and is happiest when driven between 2,000 and 4,500rpm.
the SUV takes 10.03sec to reach 100kph

Skoda Karoq Engine and gearbox


VARIANT :-


Karoq Style AT                               Rs.24.99 Lakh*1498 cc, Automatic, Petrol





Comments

Post a Comment

Popular posts from this blog

Using the TLP250 Isolated MOSFET Driver - Explanation and Example Circuits

-
Image
I’ve already shown how to drive an N-channel MOSFET (or even an IGBT) in both high-side and low-side configurations in a multitude of ways. I’ve also explained the principles of driving the MOSFETs in these configurations. The dedicated drivers I’ve shown so far are the TC427 and IR2110. Some people have requested me to write up on MOSFET drive using the very popular TLP250. And I’ll explain that here. The TLP250, like any driver, has an input stage, an output stage and a power supply connection. What’s special about the TLP250 is that the TLP250 is an optically isolated driver, meaning that the input and output are “optically isolated”. The isolation is optical – the input stage is an LED and the receiving output stage is light sensitive (think “photodetector”). Before delving any further, let’s look at the pin configuration and the truth table. Fig. 1 - TLP250 Pin Configuration Fig. 2 - TLP250 Truth Table Fig. 1 clearly shows the input LED side and the receiving photodetector as well
Read more

N-Channel MOSFET High-Side Drive: When, Why and How?

-
Image
I had previously shown how to drive N-channel MOSFETs in low-side configuration. You can find the tutorial here: http://electel.blogspot.com/2016/12/low-side-mosfet-drive-circuits-and_23.html I’ve been requested to write a tutorial/article regarding high-side MOSFET drive. So, here I’ll talk about N-channel MOSFET high-side drive. Let’s first look at the common low side configuration.  Fig. 1 - N-channel MOSFET configured as low-side switch Now let’s look at a MOSFET configured as a high-side switch. Fig. 2 - N-channel MOSFET configured as high-side switch You can quite easily see the difference between the high-side configuration and the low-side configuration. In the low-side configuration, the load is connected between the drain and +V, while the source is connected to ground. Thus, the gate drive is referenced to ground. So by applying a voltage of >7V (for Power MOSFETs) or >4V (for Logic Level MOSFETs), the MOSFET can be fully turned on. Now let’s talk about the high-side c
Read more

Using the high-low side driver IR2110 - explanation and plenty of example circuits

-
Image
In many situations, we need to use MOSFETs configured as high-side switches. Many a times we need to use MOSFETs configured as high-side and low-side switches. Such as in bridge circuits. In half-bridge circuits, we have 1 high-side MOSFET and 1 low-side MOSFET. In full-bridge circuits we have 2 high-side MOSFETs and 2 low-side MOSFETs. In such situations, there is a need to use high-side drive circuitry alongside low-side drive circuitry. The most common way of driving MOSFETs in such cases is to use high-low side MOSFET drivers. Undoubtedly, the most popular such driver chip is the IR2110. And in this article/tutorial, I will talk about the IR2110. You can download the IR2110 datasheet from the IR website. Here's the download link: www.irf.com/product-info/datasheets/data/ir2110.pdf First let’s take a look at the block diagram and the pin assignments and pin definitions (also called lead assignments and lead definitions): Fig. 1 - IR2110 block diagram (click on image to enlarge)
Read more