New York City in 1965 -- Photos That Include a Few Cars

-
From time to time I do a post categorized as "Streetscapes," showing old views of cities or towns with cars.

This post differs a little because the photos (scanned slides) are mine, and not sourced from here and there on the Internet.  I took them in June of 1965 when I was in the city for a few days.  Another difference is that the cars are incidental to the scenes I was shooting.  However, you might find interesting the (mostly) American-make vehicles seen in those days.  Click on images to enlarge.

Gallery

Looking west along 42nd Street from Tudor City.  The Daily News building is the one with the vertical stripes to the left, and near the center is the Chrysler Building.

Farther along 42nd Street, across from Grand Central Terminal.  The taxi seems to be a 1964 Dodge.

Central Park South from 5th Avenue.  That's a Mercury in the foreground.

Also Central Park South.  The Plaza Hotel is at the left.  In the foreground are a Rambler and a Pontiac.

More Central Park South.  The car with the fins seems to be a 1957 Dodge.

Unloading a Cadillac on Central Park South.

Same area, but here is a Chrysler-based stretched limousine.

East 70th Street, an upscale townhouse neighborhood.  The cars are a Buick convertible, a Ford Mustang and a Ford Thunderbird.

Roosevelt Avenue elevated railroad station, Queens Borough.  An Oldsmobile is in the foreground and the gray car behind it appears to be a Rover.

Rolls-Royce in Rockefeller Center.

West 42nd Street, just west of Times Square.  Not a fancy area, though that's a Cadillac at the curb.

The TWA terminal at JFK airport.  Plenty of cars shown here.  The queue at the right is led by a Mercedes, followed by an Oldsmobile, a Ford, a Cadillac and a Pontiac.

Comments

Post a Comment

Popular posts from this blog

N-Channel MOSFET High-Side Drive: When, Why and How?

-
Image
I had previously shown how to drive N-channel MOSFETs in low-side configuration. You can find the tutorial here: http://electel.blogspot.com/2016/12/low-side-mosfet-drive-circuits-and_23.html I’ve been requested to write a tutorial/article regarding high-side MOSFET drive. So, here I’ll talk about N-channel MOSFET high-side drive. Let’s first look at the common low side configuration.  Fig. 1 - N-channel MOSFET configured as low-side switch Now let’s look at a MOSFET configured as a high-side switch. Fig. 2 - N-channel MOSFET configured as high-side switch You can quite easily see the difference between the high-side configuration and the low-side configuration. In the low-side configuration, the load is connected between the drain and +V, while the source is connected to ground. Thus, the gate drive is referenced to ground. So by applying a voltage of >7V (for Power MOSFETs) or >4V (for Logic Level MOSFETs), the MOSFET can be fully turned on. Now let’s talk about the high-si...
Read more

Using the high-low side driver IR2110 - explanation and plenty of example circuits

-
Image
In many situations, we need to use MOSFETs configured as high-side switches. Many a times we need to use MOSFETs configured as high-side and low-side switches. Such as in bridge circuits. In half-bridge circuits, we have 1 high-side MOSFET and 1 low-side MOSFET. In full-bridge circuits we have 2 high-side MOSFETs and 2 low-side MOSFETs. In such situations, there is a need to use high-side drive circuitry alongside low-side drive circuitry. The most common way of driving MOSFETs in such cases is to use high-low side MOSFET drivers. Undoubtedly, the most popular such driver chip is the IR2110. And in this article/tutorial, I will talk about the IR2110. You can download the IR2110 datasheet from the IR website. Here's the download link: www.irf.com/product-info/datasheets/data/ir2110.pdf First let’s take a look at the block diagram and the pin assignments and pin definitions (also called lead assignments and lead definitions): Fig. 1 - IR2110 block diagram (click on image to enlarge)...
Read more

Using the SG3525 PWM Controller - Explanation and Example: Circuit Diagram / Schematic of Push-Pull Converter

-
Image
PWM is used in all sorts of power control and converter circuits. Some common examples include motor control, DC-DC converters, DC-AC inverters and lamp dimmers. There are numerous PWM controllers available that make the use and application of PWM quite easy. One of the most popular of such controllers is the versatile and ubiquitous SG3525 produced by multiple manufacturers – ST Microelectronics, Fairchild Semiconductors, On Semiconductors, to name a few. SG3525 is used extensively in DC-DC converters, DC-AC inverters, home UPS systems, solar inverters, power supplies, battery chargers and numerous other applications. With proper understanding, you can soon start using SG3525 yourself in such applications or any other application really that demands PWM control. Before going on to the description and application, let’s first take a look at the block diagram and the pin layout. Pins 1 (Inverting Input) and 2 (Non Inverting Input) are the inputs to the on-board error amplifier. If you a...
Read more