Win Semiconductor has started supplying ToF and LiDAR sensors for the iPhone 12 series, and the launch date is not far off

-

 

Lidar sensor on iPad Pro

Photo source: i-Micronews

Apple is expected to officially announce the iPhone 12 ( iPhone 2020 ) models next month. Although the company has not officially revealed the launch date, a recent report has confirmed that it is possible that the arrival of new iPhone devices will be delayed by several weeks.

Apple products have always been widely interested in users, and more and more information about these devices continues to appear on the web. With the latest news, the company Win Semiconductor has now begun manufacturing and shipping the ToF sensor along with the LiDAR scanner to Apple.

For the uninitiated, the upcoming iPhone 12 models are said to come with LiDAR (Light Detection and Ranging) sensors. This is a miniature 3D scanner, works with the same principle as the ToF camera but with higher accuracy.

iPhone 12
Leaked image of new iPhone models

This isn't the first time Apple has opted for LiDAR sensors on its devices. The company started using LiDAR technology on this year's iPad Pro with a ToF sensor. According to leaked information, not all versions of iPhone 12 will come with this technology.

Win Semiconductor currently has capacity of 41,000 units per month. If iPhone sales are better than expected, the company will likely receive more orders from Apple in the fourth quarter of this year.

Which version of the iPhone 12 do you think will use this new technology? Please leave your predictions below.

Comments

Post a Comment

Popular posts from this blog

Using the TLP250 Isolated MOSFET Driver - Explanation and Example Circuits

-
Image
I’ve already shown how to drive an N-channel MOSFET (or even an IGBT) in both high-side and low-side configurations in a multitude of ways. I’ve also explained the principles of driving the MOSFETs in these configurations. The dedicated drivers I’ve shown so far are the TC427 and IR2110. Some people have requested me to write up on MOSFET drive using the very popular TLP250. And I’ll explain that here. The TLP250, like any driver, has an input stage, an output stage and a power supply connection. What’s special about the TLP250 is that the TLP250 is an optically isolated driver, meaning that the input and output are “optically isolated”. The isolation is optical – the input stage is an LED and the receiving output stage is light sensitive (think “photodetector”). Before delving any further, let’s look at the pin configuration and the truth table. Fig. 1 - TLP250 Pin Configuration Fig. 2 - TLP250 Truth Table Fig. 1 clearly shows the input LED side and the receiving photodetector as well
Read more

N-Channel MOSFET High-Side Drive: When, Why and How?

-
Image
I had previously shown how to drive N-channel MOSFETs in low-side configuration. You can find the tutorial here: http://electel.blogspot.com/2016/12/low-side-mosfet-drive-circuits-and_23.html I’ve been requested to write a tutorial/article regarding high-side MOSFET drive. So, here I’ll talk about N-channel MOSFET high-side drive. Let’s first look at the common low side configuration.  Fig. 1 - N-channel MOSFET configured as low-side switch Now let’s look at a MOSFET configured as a high-side switch. Fig. 2 - N-channel MOSFET configured as high-side switch You can quite easily see the difference between the high-side configuration and the low-side configuration. In the low-side configuration, the load is connected between the drain and +V, while the source is connected to ground. Thus, the gate drive is referenced to ground. So by applying a voltage of >7V (for Power MOSFETs) or >4V (for Logic Level MOSFETs), the MOSFET can be fully turned on. Now let’s talk about the high-side c
Read more

Using the SG3525 PWM Controller - Explanation and Example: Circuit Diagram / Schematic of Push-Pull Converter

-
Image
PWM is used in all sorts of power control and converter circuits. Some common examples include motor control, DC-DC converters, DC-AC inverters and lamp dimmers. There are numerous PWM controllers available that make the use and application of PWM quite easy. One of the most popular of such controllers is the versatile and ubiquitous SG3525 produced by multiple manufacturers – ST Microelectronics, Fairchild Semiconductors, On Semiconductors, to name a few. SG3525 is used extensively in DC-DC converters, DC-AC inverters, home UPS systems, solar inverters, power supplies, battery chargers and numerous other applications. With proper understanding, you can soon start using SG3525 yourself in such applications or any other application really that demands PWM control. Before going on to the description and application, let’s first take a look at the block diagram and the pin layout. Pins 1 (Inverting Input) and 2 (Non Inverting Input) are the inputs to the on-board error amplifier. If you a
Read more