1988 Cadillac Voyage Concept

-
One of General Motors' most interesting concept cars from around 1990 was the 1988 Cadillac Voyage (background here).

Unlike some concepts, this wasn't a motorless "pushmobile."  It even appeared in the 1993 Sylvester Stallone movie "Domolition Man."

The Voyage's design was wind tunnel tested, though GM stylists used enough straight-edge and angular detailing to avoid the overly-rounded appearance seen on recent Fords.  As shown below, some of the styling spirit of the Voyage found its way onto later GM production cars.  The Voyage images are from GM.

Gallery

Front quarter view.  Being a concept car, it has small bumpers.  Windows are large, a carryover from 1970-80 "three-box" design practice.  Note the cutline above the front wheel opening.  According to the first link above, that panel pivoted when the wheel turning angle was large enough, thus fixing (with some complexity) a problem with designs such as 1950-vintage Nashes featuring skirted front wheels.

High rear quarter view.  This shows the see-through roof, a feature I hadn't been aware of until writing this post.  The rear has a nicely styled theme using straight lines that stiffen the design while serving as counterpoint to the swoopy greenhouse curves.  I like the tail light design.


Front.  I assume those green colored areas flanking the grille are sequential turn indicator lights.

Side view.  Too bad this didn't emerge as a production Cadillac.

Here is a 1992 or '93 Buick Riviera that has some of the spirit of the Voyage.

Left side view.  I include this for comparison to the views of production cars below.

1992 Cadillac Seville, photo source unknown.  Its profile is similar to the Voyage's, but the wheel openings are large and greenhouse shapes are more angular.

1994 for-sale Cadillac Seville Concourse sedan.  Wheel openings are more squared-off and the lower body faintly echoes the Voyage.



A stronger Voyage echo can be seen on this 1994 Chevrolet Impala SS (Mecum auction photo) -- especially in the region of the passenger greenhouse profile and detailing.

Comments

Post a Comment

Popular posts from this blog

Using the SG3525 PWM Controller - Explanation and Example: Circuit Diagram / Schematic of Push-Pull Converter

-
Image
PWM is used in all sorts of power control and converter circuits. Some common examples include motor control, DC-DC converters, DC-AC inverters and lamp dimmers. There are numerous PWM controllers available that make the use and application of PWM quite easy. One of the most popular of such controllers is the versatile and ubiquitous SG3525 produced by multiple manufacturers – ST Microelectronics, Fairchild Semiconductors, On Semiconductors, to name a few. SG3525 is used extensively in DC-DC converters, DC-AC inverters, home UPS systems, solar inverters, power supplies, battery chargers and numerous other applications. With proper understanding, you can soon start using SG3525 yourself in such applications or any other application really that demands PWM control. Before going on to the description and application, let’s first take a look at the block diagram and the pin layout. Pins 1 (Inverting Input) and 2 (Non Inverting Input) are the inputs to the on-board error amplifier. If you a...
Read more

N-Channel MOSFET High-Side Drive: When, Why and How?

-
Image
I had previously shown how to drive N-channel MOSFETs in low-side configuration. You can find the tutorial here: http://electel.blogspot.com/2016/12/low-side-mosfet-drive-circuits-and_23.html I’ve been requested to write a tutorial/article regarding high-side MOSFET drive. So, here I’ll talk about N-channel MOSFET high-side drive. Let’s first look at the common low side configuration.  Fig. 1 - N-channel MOSFET configured as low-side switch Now let’s look at a MOSFET configured as a high-side switch. Fig. 2 - N-channel MOSFET configured as high-side switch You can quite easily see the difference between the high-side configuration and the low-side configuration. In the low-side configuration, the load is connected between the drain and +V, while the source is connected to ground. Thus, the gate drive is referenced to ground. So by applying a voltage of >7V (for Power MOSFETs) or >4V (for Logic Level MOSFETs), the MOSFET can be fully turned on. Now let’s talk about the high-si...
Read more

Low-Side MOSFET Drive Circuits and Techniques - 7 Practical Circuits

-
Image
In many circuits, it is necessary to use MOSFETs for switching. In many cases, the MOSFET drive signals are generated by microcontrollers. In other cases, they are generated by ICs – PWM controllers, timers or any IC in fact. However, MOSFETs cannot always just be connected to the drive signal and be expected to work properly. Due to the construction of the MOSFET, driving it is not the simplest of tasks, especially for beginners. There are many users who regularly ask for help on MOSFET drive related issues or problems on different blogs, websites and forums. So, here I will show some MOSFET drive techniques/methods for MOSFETs configured as low-side switches. Before I head on to MOSFET drive, let me just tell you what a low-side switch is, in case you don't know. When the MOSFET (that you're using as a switch) sinks current, it is a low-side switch. The load will be between the drain and +V supply. The source will be connected to ground. Gate will be driven with respect to gr...
Read more