Recycled Lincoln Grille Design Themes

-
The present post is a slightly modified version of a post I wrote in 2013 for my Art Contrarian blog.

For a couple of decades, we in North America became used to seeing Lincoln automobile grilles that looked like these shown below.

These are Lincoln Town Cars, a model produced for many years.  The upper photo is of a 2002 model, the lower shows a Town Car from around 2011.  Their shield-like grille shape dates from the 1993 Lincoln Mark VIII, though rectangular grilles with wide chrome frames and thin, vertical bars continued on some models until the 2002 model year.

Changes in grille design rapidly accelerated by 2007 as Lincoln sales continued to dwindle from the 1989-90 peak.  2013 models had faces such as on the MKZ model shown here.

I don't like that grille design.  But I do find it interesting how Lincolns stylists raided the marque's historical parts bin, so to speak, in a search for a different theme 1993-2007 and the 20-odd years before that.

Consider the Lincoln Navigator SUV (sport-utility vehicle).  The upper photo is of a 2003 model, the lower one shows the 2007 Navigator with a different grille theme.  Where might that theme have come from?

Probably from the design Lincolns sported for the 1946-1948 model years.  Shown here in a Mecum auction photo is a Lincoln Continental Cabriolet.

Then there is the grille on the 2013 Lincoln MKX crossover SUV.  It has been around for a few model years and is similar in spirit to the MKZ shown above except that the grille bars are heavy and are aligned vertically rather than horizontally.  And where might this have come from?

Once source was probably this 1995 concept car called the Sentinel.  But we can push the idea even farther back to...

...the 1939-1941 model Lincoln Zephyrs and Continentals (above is a 1940 model Lincoln Zephyr, Hyman photo).

In the midst of this stylistic thrashing about, he find the...

...2007 Lincoln MKX (upper) whose grille reminds one of the of the 1964 Lincoln Continental (lower photo via barrett-Jackson.

Where else might Lincoln stylist care to dig for traditionally based grille themes?  I suggest these as starters:

The upper (Bonhams auction) image is of a 1942 Lincoln Continental Coupe, the lower shows the grille used on 1949 Lincolns.

Comments

Post a Comment

Popular posts from this blog

Using the TLP250 Isolated MOSFET Driver - Explanation and Example Circuits

-
Image
I’ve already shown how to drive an N-channel MOSFET (or even an IGBT) in both high-side and low-side configurations in a multitude of ways. I’ve also explained the principles of driving the MOSFETs in these configurations. The dedicated drivers I’ve shown so far are the TC427 and IR2110. Some people have requested me to write up on MOSFET drive using the very popular TLP250. And I’ll explain that here. The TLP250, like any driver, has an input stage, an output stage and a power supply connection. What’s special about the TLP250 is that the TLP250 is an optically isolated driver, meaning that the input and output are “optically isolated”. The isolation is optical – the input stage is an LED and the receiving output stage is light sensitive (think “photodetector”). Before delving any further, let’s look at the pin configuration and the truth table. Fig. 1 - TLP250 Pin Configuration Fig. 2 - TLP250 Truth Table Fig. 1 clearly shows the input LED side and the receiving photodetector as well
Read more

N-Channel MOSFET High-Side Drive: When, Why and How?

-
Image
I had previously shown how to drive N-channel MOSFETs in low-side configuration. You can find the tutorial here: http://electel.blogspot.com/2016/12/low-side-mosfet-drive-circuits-and_23.html I’ve been requested to write a tutorial/article regarding high-side MOSFET drive. So, here I’ll talk about N-channel MOSFET high-side drive. Let’s first look at the common low side configuration.  Fig. 1 - N-channel MOSFET configured as low-side switch Now let’s look at a MOSFET configured as a high-side switch. Fig. 2 - N-channel MOSFET configured as high-side switch You can quite easily see the difference between the high-side configuration and the low-side configuration. In the low-side configuration, the load is connected between the drain and +V, while the source is connected to ground. Thus, the gate drive is referenced to ground. So by applying a voltage of >7V (for Power MOSFETs) or >4V (for Logic Level MOSFETs), the MOSFET can be fully turned on. Now let’s talk about the high-side c
Read more

Using the high-low side driver IR2110 - explanation and plenty of example circuits

-
Image
In many situations, we need to use MOSFETs configured as high-side switches. Many a times we need to use MOSFETs configured as high-side and low-side switches. Such as in bridge circuits. In half-bridge circuits, we have 1 high-side MOSFET and 1 low-side MOSFET. In full-bridge circuits we have 2 high-side MOSFETs and 2 low-side MOSFETs. In such situations, there is a need to use high-side drive circuitry alongside low-side drive circuitry. The most common way of driving MOSFETs in such cases is to use high-low side MOSFET drivers. Undoubtedly, the most popular such driver chip is the IR2110. And in this article/tutorial, I will talk about the IR2110. You can download the IR2110 datasheet from the IR website. Here's the download link: www.irf.com/product-info/datasheets/data/ir2110.pdf First let’s take a look at the block diagram and the pin assignments and pin definitions (also called lead assignments and lead definitions): Fig. 1 - IR2110 block diagram (click on image to enlarge)
Read more